BLDC Controllers

BLDC Controller - RF

BLDC Controller - IR

Features
 Energy efficient- More Than 70% power saving
Our driver card is compatible with all types of 3-phase LV BLDC motors.
Consistent speed from 110V t0 300V AC
LED and Buzzer indication
Easy speed control using remote
Parameters Specification
Rated Input (W) upto 32 W @370 RPM
No Load Wattage < 5 W
Operating Input AC voltage range (V) 90 to 300V
Rated power factor  > 0.95
Drive Method FOC
Back turn while starting  No back turn
Last memory (Last set Speed) Retention Yes
Lower Cut off Voltage 80 V
Higher Cut off Voltage 300V
While starting No Jerk
Over current protection Yes
EMI/EMC Compatibility
Surge IEC61000-4-5
EFT (Electric Fast Transient/ Bursts) IEC61000-4-4
Radiated RF Immunity CISPR 14-2, IEC 61000-4-3
Voltage Dip and interruption IEC 61000-4-11
CS (Conducted Susceptibility) EN61000-4-6
RE(Radiated Emissions) CISPR 14-1
Total Harmonic Distortion (THD) < 5%.
Reliability Test
Thermal Shock Temperature: – 20°C (for 30 min); +80°C (for 30 min)
High Temperature Test Teperature: +60 degrees Centigrade
Low Temperature Test Temperature: -20 + 4 degC for 24 Hrs
Vibration Test 120min in X, Y & Z direction at 500rpm
Power Supply Capable to handle 40 watts Load contionously without fail
Power Lock > 35 W
Speed Ramp up time ( 0 to full speed) < 20 sec
Communication interface
Regulation RF remote-Distance 30 m
Remote Carrier frequency and Protocol 433 MHz carrier frequency
Parameters Specification
Rated Input (W) upto 32 W @370 RPM
No Load Wattage < 5 W
Operating Input AC voltage range (V) 90 to 300V
Rated power factor  > 0.95
Drive Method FOC
Back turn while starting  No back turn
Last memory (Last set Speed) Retention Yes
Lower Cut off Voltage 80 V
Higher Cut off Voltage 300V
While starting No Jerk
Over current protection Yes
EMI/EMC Compatibility
Surge IEC61000-4-5
EFT (Electric Fast Transient/ Bursts) IEC61000-4-4
Radiated RF Immunity CISPR 14-2, IEC 61000-4-3
Voltage Dip and interruption IEC 61000-4-11
CS (Conducted Susceptibility) EN61000-4-6
RE(Radiated Emissions) CISPR 14-1
Total Harmonic Distortion (THD) < 5%.
Reliability Test
Thermal Shock Temperature: – 20°C (for 30 min); +80°C (for 30 min)
High Temperature Test Teperature: +60 degrees Centigrade
Low Temperature Test Temperature: -20 + 4 degC for 24 Hrs
Vibration Test 120min in X, Y & Z direction at 500rpm
Power Supply Capable to handle 40 watts Load contionously without fail
Power Lock > 35 W
Speed Ramp up time ( 0 to full speed) < 20 sec
Communication interface
Regulation IR remote-Distance 20 feet
Remote Carrier frequency and Protocol 38 KHz carrier frequency and NEC